FILTER & CLEANING PIN

Home / AH 1200 / Filter & Cleaning Pin
Filter & Cleaning Pin

FILTER & CLEANING PIN

The AH 1200 inlet filter screens out sediment and debris from the water supply, protecting the internal pump from premature wear. The included cleaning pin is used to clear any blockage in the nozzle orifice quickly — keeping water flow consistent and pressure performance at its peak.

 USAGE DO's

  • Install the filter at the water inlet connection before every use.
  • Inspect the filter mesh for clogs or damage before each session and clean under running water if needed.
  • Use the cleaning pin to gently dislodge any blockage inside the nozzle tip.
  • Replace the filter if the mesh is torn, deformed, or cannot be cleaned effectively.

 USAGE DON'Ts

  • Never operate the AH 1200 without the inlet filter installed — doing so can void the warranty.
  • Do not use a damaged or cracked filter as it will allow debris into the pump.
  • Avoid using the cleaning pin on the filter mesh itself — it is only for the nozzle orifice.
  • Do not force the filter housing if it does not seat smoothly — check the thread for damage.