FIRST TIME SETUP
Follow these steps to get your AH 1200 High Pressure Washer ready for action.
1
Unpack and Inspect
Remove the machine and all accessories from the box. Verify you have the gun, extension lance, hose, foam bottle, quick connector, and filter pin.
2
Install Water Inlet Filter
Screw the transparent water filter onto the machine's water inlet. Hand‑tighten only.
Note: Do not use tools.
3
Connect High Pressure Hose
Attach one end of the high‑pressure hose to the machine's outlet. Ensure a secure click or screw.
4
Attach the Gun & Jet Nozzle
Secure the gun onto the hose and attach the jet nozzle.
5
Hook Up Power and Test
Plug the unit into a 220‑240 V outlet. Turn on the water supply, then press the power button. Squeeze the trigger gun to start cleaning — the machine operates at a fixed optimum pressure with no manual adjustment needed.